Take Control of Energy Bill Forecast

As the outside temperature drops and the climate gets more serious, windows become increasingly important in protecting your home from the elements. When the weather becomes colder, cold air can sneak into your home via drafts in your doors and windows. Apparently, there’s an alternative for protecting your home against unpleasant temperature changes.

Photo: freepik

One of the most important reasons for opting to replace your windows with energy-efficient ones is the defense and easement they provide. As a matter of course, windows that are made on the market convey more of the issues about preserving heat in the house during colder seasons and lowering energy expenditures.

Getting an idea of your windows’ ability to withstand extreme weather is crucial in selecting what sort of windows to purchase and, as a result, how much you would be spending on them.

HVAC and New Windows

Almost half of a typical household’s consumption of energy in the United States is connected to cooling and heating, which also makes high-efficiency HVAC systems vital to controlling the consumption of energy and expenditures for both individual homeowners and the nation as a whole.

New windows are likely to save you dollars on your cooling and heating expenditures. That, however, depends on the window type you have in your home. It’s always a good idea to upgrade single-paned glass windows. Installation of energy-efficient replacement windows makes it unchallenging to cool the house during the summer and heat the house during the winter. This improves the energy efficiency of the HVAC system and lowers heating and cooling costs.

Window Rating

In finding out the performance rating of a window, the Solar Heat Gain Coefficient (SHGC) ratings are an important factor, along with the U-Value (thermal heat loss) (ER).

SHGC must be considered in concurrence with the window’s whereabouts at home. A room with a south or west exposure receives the highest solar gain. According to a new study, placing medium-high SHGC windows in these subjections actually causes additional warmth and discomfort. It is preferable to focus on a low U-Value (High R-Value) rather than trying to gain heat in these rooms.

Modifying the order of your windows according to exposure to meet the demands of certain rooms will help you keep your house comfortable while lowering your heating costs.

Condensation

Condensation is another impact of harsh weather. Well, one thing is for sure, with new windows, this occurrence will not take place. That does not imply that your windows are damaged. And your initial assessment is that you only need a window repair involving a damaged or broken glass. That is not always the case because glass repair is absolutely different from window replacement.

In some circumstances, new windows have more condensation at first than the old ones that were removed. Sure, it does not make sense. Higher variances in exterior and the temperature at the surface of a unit are likely to create more condensation because they provide a better barrier between two variable temperatures. As time passes and the window adapts to the house, homeowners will definitely notice less condensation.

Photo: Unsplash

Water freezing on windows is prevalent in sections of the house where there is naturally more amount of water vapor in the air like the bathroom and kitchen. While this can also happen on room windows, it is a cause for concern because it can be an indication that a unit is not properly sealed.

As the frame contracts due to the impact of cold temperatures, sealed-unit failure can occur. This is a problem that can typically be avoided if windows are installed properly and the frame is precisely shimmed and foamed. This guarantees that structural stress is distributed uniformly and that the unit’s weight is distributed evenly across the frame.
If the glazing has condensation and is leveled out, then the unit is properly sealed. Otherwise, if condensation forms around the edges of the glass but not in the middle, then the unit may not have enough gas-filled.
Proper study and planning, like with most aspects of the replacement process, are critical in ensuring you acquire the perfect windows. Understanding how SHGC can affect a room’s comfort, as well as correct installation and windows’ quality, are all critical considerations in ensuring they operate for you throughout the colder months while lowering your heating costs.

Let Your Bathroom Breathe

What if your home’s design makes it hard for you to vent a bathroom fan to the exterior of your home? Here we are going to discuss some tips on how to improve your bathroom’s ventilation especially if you are dealing with a design that is complicated for proper installation of ventilation.

Photo: Sidekix Media on Unsplash

Bathroom ventilation is usually not an issue in most homes. The bathroom ceiling is fitted with a fan or fan/light combination, which is then vented through the roof, soffit, or side wall.

Bad smell and additional moisture are readily vented outside with the flip of a switch. But what if a building’s construction makes venting a bath fan to the outside problematic or impossible?

As it turns out, there are a variety of circumstances that can make installing a bathroom fan that vents to the outside challenging. To solve this difficulty, a skilled HVAC contractor will need to use some construction inventiveness, savvy product selection, and installation abilities.

Dealing with Bathroom Ventilation

It’s important to understand fundamentals and required building codes before diving into remedies for complex bathroom ventilation difficulties. People knew outhouses needed air even before they had indoor plumbing.

When bathrooms were brought indoors, ventilation was essential to remove not only odors but also excess wetness. We all know how much moisture a hot shower can produce—consider the fogged mirrors and condensation that develops on windows and walls, especially when it’s chilly outdoors.

Most towns’ construction codes now require bathrooms to be ventilated with either an exhaust. The window ventilation option is a bare minimum that is neither functional nor dependable. It’s risky to rely on someone else to open a window to vent extra moisture, especially in cold weather. A vent fan will always be more effective in removing moisture.

Signs of Poor Bathroom Ventilation

Photo: Aztil Air Conditioning

Today’s houses are more airtight and well-insulated than those of the past. The requirement to “construct tight and insulate well” has several advantages, including increased interior comfort (particularly during temperature extremes), fuel and power savings, and reduced carbon emissions.

However, tight construction increases the risk of indoor air pollution significantly. Mold spores are one of the most dangerous indoor air pollutants because mold is caused by too much moisture. Mold is a severe health concern that can cause a variety of respiratory problems as well as allergic reactions. Common building materials such as wood and gypsum board will be harmed or destroyed.

A plumbing leak might develop mold in a bathroom, but splotchy stains on the walls or ceilings usually suggest poor ventilation—too much moisture in the air. Mold can grow on wood or insulation in an attic space above a bathroom as a result of this. Even if you can’t see mold, the foul odor is a sure clue that it’s there.

While there are other reasons to fix bathroom ventilation issues, such as the discomfort of hazy mirrors, preventing mold is by far the most compelling.

General Rule for Bathroom Fans

Let’s go over some fundamental basics about bathroom fans before getting into more challenging bathroom ventilation issues and how to solve them. Understanding these components will assist you in making the best bathroom ventilation selections, whether simple or complex.

a. Getting the Right Fan.

Bath fans are sized by the amount of air they can flow, which is measured in cubic feet per minute (cfm). The rule of thumb is that for every square foot of floor area in your bathroom, you’ll need 1 cfm. However, in a restroom that receives a lot of use or has a high ceiling, it’s best to err on the side of caution. Better fans are designed to be quieter than cheaper models. Instead of 3 or 4, look for a rating of around.

b. Taking Note of Special Features.

The use of a bath fan with a light eliminates the requirement for a separate ceiling fixture. While you’re generating a lot of humidity, such as when taking a long shower or using a jetted tub, a fan with variable speed control can help.

Choosing the Best Bathroom Fan

You can get a bath fan with a humidistat, which allows you to have the fan come on automatically when a specified humidity level is detected, ensuring that it works when it’s needed.

This is an excellent alternative if you’re renting an apartment and aren’t sure if the fan will be used properly. The idea is that not every fan is made equal. Choosing specific characteristics can help you deal with difficult ventilation situations.